3.5 tons Sany 35 Mini Excavator Track Crawler Micro Digger

The detailed parameters of SY35U excavator are as follows:
Basic specifications
Equipment Model: SY35U
Model abbreviation: 35
Tonnage Range: Micro-cut (under 4 tons)
Walking Mode: Tracked
Форма ковша: обратная лопата
Working condition use: general purpose
mechanical system
Engine Model: Yanmar 3 TNV88 Stages3A EPA int4
Type: inline, four-stroke, water-cooled, mechanical pump, natural suction
Frontal fixed power: 20.2 ~ 20.4 kW / 2200rpm
Maximum torque: 107 N · m (specific speed may vary, e.g. 107 / 1300 N · m)
Displacement: 1.642L
Параметры производительности
Working weight: 3780kg
Емкость ковша: 0,12 м3
Rotary speed: 9 ~ 10 rpm
Walking speed (high / low): 4.4 / 2.4 km / h (some figures show 4.2 / 2.4 km / h)
Climbing ability: 58%
Ground specific voltage: 32 kPa (some data shows 32 ~ 35 kPa)
Bucket digging force: 30.4 kN
Arm digging force: 18.2 kN
Walking part
Track width: 300 mm
Support wheels per side: 4
Sprocket: 1
Track grounding length: 1670 mm
Total track length: 2155 mm
Track gauge: 1420 mm
Minimum ground clearance: 295 mm
Размер основного корпуса
Total transport length: 4915mm
Total transport width: 1720 mm
Total transport height: 2515 mm
Rear end radius of gyration: 860 mm
Scope of work
Maximum excavation radius: 5465 mm
Maximum excavation depth: 3105 mm
Maximum excavation height: 4855 mm
Maximum unloading height: 3460 mm
Maximum vertical excavation depth: 2700 mm
Shovel lift or depth: depending on the configuration, e.g. 370 to 375 mm
Емкость для масла
Fuel tank: 40 ~ 50 L
Hydraulic Tank: 40 L
Engine Oil Replacement: 6 L
Coolant: The specific capacity is not specified, but it is usually a separate circulation system.

видео